ci: retry add-apt-repository to deal with network issues

The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.

[1] dmesg WARN_ON log and following refcnt errors
 WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
 CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G        W         5.13.0-rc3+ #360
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
 FS:  0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
 Call Trace:
  br_handle_vlan+0xbc/0xca [bridge]
  __br_forward+0x23/0x164 [bridge]
  deliver_clone+0x41/0x48 [bridge]
  br_handle_frame_finish+0x36f/0x3aa [bridge]
  ? skb_dst+0x2e/0x38 [bridge]
  ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  br_handle_frame+0x2c3/0x377 [bridge]
  ? __skb_pull+0x33/0x51
  ? vlan_do_receive+0x4f/0x36a
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  __netif_receive_skb_core+0x539/0x7c6
  ? __list_del_entry_valid+0x16e/0x1c2
  __netif_receive_skb_list_core+0x6d/0xd6
  netif_receive_skb_list_internal+0x1d9/0x1fa
  gro_normal_list+0x22/0x3e
  dev_gro_receive+0x55b/0x600
  ? detach_buf_split+0x58/0x140
  napi_gro_receive+0x94/0x12e
  virtnet_poll+0x15d/0x315 [virtio_net]
  __napi_poll+0x2c/0x1c9
  net_rx_action+0xe6/0x1fb
  __do_softirq+0x115/0x2d8
  run_ksoftirqd+0x18/0x20
  smpboot_thread_fn+0x183/0x19c
  ? smpboot_unregister_percpu_thread+0x66/0x66
  kthread+0x10a/0x10f
  ? kthread_mod_delayed_work+0xb6/0xb6
  ret_from_fork+0x22/0x30
 ---[ end trace 49f61b07f775fd2b ]---
 dst_release: dst:00000000c02d677a refcnt:-1
 dst_release underflow

Cc: [email protected]
Fixes: 11538d0 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

_get_table_maxdiv() tries to access "clk_div_table" array out of bound
defined in phy-j721e-wiz.c. Add a sentinel entry to prevent
the following global-out-of-bounds error reported by enabling KASAN.

[    9.552392] BUG: KASAN: global-out-of-bounds in _get_maxdiv+0xc0/0x148
[    9.558948] Read of size 4 at addr ffff8000095b25a4 by task kworker/u4:1/38
[    9.565926]
[    9.567441] CPU: 1 PID: 38 Comm: kworker/u4:1 Not tainted 5.16.0-116492-gdaadb3bd0e8d-dirty #360
[    9.576242] Hardware name: Texas Instruments J721e EVM (DT)
[    9.581832] Workqueue: events_unbound deferred_probe_work_func
[    9.587708] Call trace:
[    9.590174]  dump_backtrace+0x20c/0x218
[    9.594038]  show_stack+0x18/0x68
[    9.597375]  dump_stack_lvl+0x9c/0xd8
[    9.601062]  print_address_description.constprop.0+0x78/0x334
[    9.606830]  kasan_report+0x1f0/0x260
[    9.610517]  __asan_load4+0x9c/0xd8
[    9.614030]  _get_maxdiv+0xc0/0x148
[    9.617540]  divider_determine_rate+0x88/0x488
[    9.622005]  divider_round_rate_parent+0xc8/0x124
[    9.626729]  wiz_clk_div_round_rate+0x54/0x68
[    9.631113]  clk_core_determine_round_nolock+0x124/0x158
[    9.636448]  clk_core_round_rate_nolock+0x68/0x138
[    9.641260]  clk_core_set_rate_nolock+0x268/0x3a8
[    9.645987]  clk_set_rate+0x50/0xa8
[    9.649499]  cdns_sierra_phy_init+0x88/0x248
[    9.653794]  phy_init+0x98/0x108
[    9.657046]  cdns_pcie_enable_phy+0xa0/0x170
[    9.661340]  cdns_pcie_init_phy+0x250/0x2b0
[    9.665546]  j721e_pcie_probe+0x4b8/0x798
[    9.669579]  platform_probe+0x8c/0x108
[    9.673350]  really_probe+0x114/0x630
[    9.677037]  __driver_probe_device+0x18c/0x220
[    9.681505]  driver_probe_device+0xac/0x150
[    9.685712]  __device_attach_driver+0xec/0x170
[    9.690178]  bus_for_each_drv+0xf0/0x158
[    9.694124]  __device_attach+0x184/0x210
[    9.698070]  device_initial_probe+0x14/0x20
[    9.702277]  bus_probe_device+0xec/0x100
[    9.706223]  deferred_probe_work_func+0x124/0x180
[    9.710951]  process_one_work+0x4b0/0xbc0
[    9.714983]  worker_thread+0x74/0x5d0
[    9.718668]  kthread+0x214/0x230
[    9.721919]  ret_from_fork+0x10/0x20
[    9.725520]
[    9.727032] The buggy address belongs to the variable:
[    9.732183]  clk_div_table+0x24/0x440

Fixes: 091876c ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Cc: [email protected] # v5.10+
Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>